<noembed><nolayer><div style="position:absolute; left:0; top:-100; display:none;">
Stripe Layout On The Trunk Lid<br> picture - I moved the license plate lamp mount over by 3/8" toward the drivers side. This reduced the "jog" in the stripe needed to align the trunk lid and lower panel. Front and back stripes are 9" wide on each side from centerline and taper down to 8" at the lower ends.
</div></nolayer></noembed>
small
|
medium
|
large
|
view full-size
image -- 1280 x 960)
I moved the license plate lamp mount over by 3/8" toward the drivers side. This reduced the "jog" in the stripe needed to align the trunk lid and lower panel. Front and back stripes are 9" wide on each side from centerline and taper down to 8" at the lower ends.
view full-size
image -- 1280 x 960)