<noembed><nolayer><div style="position:absolute; left:0; top:-100; display:none;">
Engine Bay Rubber Filler Panels<br> picture - 4/7/07 - Fabricated some rubber filler panels to close off the engine bay for a more EOM look. The panels are made from 1/16" neoprene rubber and can be seen around the cutout for the lower mount of the lower control arm, the cutout for the upper control arm, and the cutout for the coolant aluminum tube. The pieces were glued to the aluminum panel in the fender well area with black weatherstrip cement. That area will be coated with rubberized undercoating later.
</div></nolayer></noembed>
small
|
medium
|
large
|
view full-size
image -- 1280 x 960)
4/7/07 - Fabricated some rubber filler panels to close off the engine bay for a more EOM look. The panels are made from 1/16" neoprene rubber and can be seen around the cutout for the lower mount of the lower control arm, the cutout for the upper control arm, and the cutout for the coolant aluminum tube. The pieces were glued to the aluminum panel in the fender well area with black weatherstrip cement. That area will be coated with rubberized undercoating later.
view full-size
image -- 1280 x 960)