<noembed><nolayer><div style="position:absolute; left:0; top:-100; display:none;">
Rear Koni Install & Modifed Bracket<br> picture - 11/11/08 - Before the rear Koni shock on the driver's side could be mounted, a small section of the 3/4" square tubing that makes up the panhard bar bracket had to be trimmed. Just above the heim joint bracket for the panhard bar, note the partially trimmed metal part.
</div></nolayer></noembed>
small
|
medium
|
large
|
view full-size
image -- 1600 x 1200)
11/11/08 - Before the rear Koni shock on the driver's side could be mounted, a small section of the 3/4" square tubing that makes up the panhard bar bracket had to be trimmed. Just above the heim joint bracket for the panhard bar, note the partially trimmed metal part.
view full-size
image -- 1600 x 1200)