|
This view from underneath the trunk further illustrates the mounting method for the overriders. This is the bottom rod. Note the wood strip I placed between the rear-most aluminum panel and the 3/4" frame tube. The 3/16" oak strip is a spacer I made to set the trunk aluminum back slighty facilitating a tight fit between the bulbseal and the body. I used #8 SS sheet metal screws instead of rivets (drilled throught the aluminum/oak/frame) to affix the lower edge of the trunk aluminum. Also note the Allen head bolt holding the gas tank strap mount.
| 
view full-size
image -- 1024 x 768)