<noembed><nolayer><div style="position:absolute; left:0; top:-100; display:none;">
Homemade radiator fan mounting bracket<br> picture - The supplied FFR fan was inadequate for a car with A/C so I had to replace it with a 2800 cfm Proform fan. The fan is supposed to mount to the lip of the stock radiator. I'm using an AFCO racing aluminum radiator which is made from very soft aluminum. I had to fabricate a bracket that would support the fan from the frame instead of the radiator edge. The large hole allows for adjustment of the fan's control thermostat.
</div></nolayer></noembed>
small
|
medium
|
large
|
view full-size
image -- 1280 x 960)
The supplied FFR fan was inadequate for a car with A/C so I had to replace it with a 2800 cfm Proform fan. The fan is supposed to mount to the lip of the stock radiator. I'm using an AFCO racing aluminum radiator which is made from very soft aluminum. I had to fabricate a bracket that would support the fan from the frame instead of the radiator edge. The large hole allows for adjustment of the fan's control thermostat.
view full-size
image -- 1280 x 960)